Products

DESCRIPTION

Basic Info

Model NO.	TK-2SFP10G-AOC
Condition	New
Jacket Material	LSZH/PVC
Cable Diameter	3.0mm
Fiber Type	62.5/125
Fiber Cores	8/12
Bandwidth	[email protected]
Attenuation dB/Km	≤ 3.5 at 850nm; ≤ 1.5 at 1310nm
Short Tension	120n
Tight Buffer Color	Aqua
Min. Bending Radius	30mm
Operating Temperature	0-85ºC
Transport Package	64PCS in Each PP Bag Then in Carton
Specification	CE, ROHS, FCC
Trademark	Takfly
Origin	Shenzhen, China
HS Code	854470000
Production Capacity	30, 000 PCS/Day

Product Description

40G QSFP to 10G SFP AOC Active Optical Cable

 

Introduction:
The TK-2SFP10G-AOC150CM/200CM/250CM is a Two-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) to 2 x SFP+ Active Optical Cable break-out solution. This Breakout cable is intended for 40G to 2 x 10G applications.This AOC is a high performance cable for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 2 x 10G InfiniBand QDR applications and are backwards compatible to the 4 x 5G IB DDR and 4 x 2.5G IB single IB SDR applications.This AOC incorporates TAKFLY' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Features:
QSFP+ AOC end:1. Compliant to the 40GBASE-SR4 and XLPPI2. Specification per IEEE 802.3ba-2010 and supporting3. 40G-IB-QDR / 20G-IB-DDR / 10G-IB-SDR applications4. Compliant to the industry standard SFF-84365. Power Level 1: Max Power < 1.5 W6. Operate at 10.3125 Gbps per channel with 64b/66b7. Encoded data for 40GbE application and at 10 Gbps with 8b/10b compatible encoded data for 40G-IB-QDR applicationEach 2x SFP+ end:1. Compliant to the electrical specifications per SFF-8431 Specifications for Enhanced Small Form Factor Pluggable Module2. Mechanical specifications per SFF Committee SFF-8432 Improved Pluggable Form factor "IPF"3. Maximum power dissipation 0.35W per end.Active Optical Cable Assembly:1. 0 to 85 C degree case temperature operating range2. Proven High Reliability 850 nm technology: VCSEL transmitter and PIN receiver3. Hot pluggable for ease of servicing and installation4. Two Wire Serial interface5. Utilizes optical fiber for high density and thin, lightweight cable management

Application:
1. 40GbE and 10GbE break-out applications for Datacom switch and router connections2. 40G to 2xlOG density applications for Datacom and Proprietary protocol applications3. Datacenter

Quality Warranty: 3 years

Active Cable-End Electrical Characteristics:
The following characteristics are defined over the Recommended Operating Conditions
unless otherwise noted. Typical values are for Tc = 40 °C, Vcc = 3.3 V

Parameter	Symbol	Min	Typical	Max	Unit
QSFP+ 40G Active Cable-End Power Consumption				1.5	W
QSFP+ 40G Active Cable-End Power Supply Current				300	mA
SFP+ 10G Active Cable-End Power Consumption				0.35	W
SFP+ 10G Active Cable-End Power Supply Current				100	mA

QSFP+ AOC-end Electrical Characteristics Electrical Specifications:

Parameter	Symbol	Min	Typical	Max	Unit
Differential input impedance	Zin	90	100	110	ohm
Differential Output impedance	Zout	90	100	110	ohm
Differential input voltage amplitude	AVin	300		1100	mVp-p
Differential output voltage amplitude	AVout	400		800	mVp-p
Bit Error Rate	BR			E-12
Input Logic Level High	VIH	2.0		VCC	V
Input Logic Level Low	VIL	0		0.8	V
Output Logic Level High	VOH	VCC-0.5		VCC	V
Output Logic Level Low	VOL	0		0.4	V

SFP+ AOC-end Electrical Specifications:

Parameter	Symbol	Min	Typical	Max	Unit
Differential input impedance	Zin	90	100	110	ohm
Differential Output impedance	Zout	90	100	110	ohm
Differential input voltage amplitude	AVin	100		1800	mVp-p
Differential output voltage amplitude	AVout	400		800	mVp-p
Bit Error Rate	BR			E-12
Input Logic Level High	VIH	2.0		VCC	V
Input Logic Level Low	VIL	0		0.8	V

Recommended Operating Conditions and Supply Requirements:

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	TOPC	0		85	degC
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Data Rate	DR		10.3	11.3	Gbps
Data Speed Tolerance	ADR	-100		+100	ppm
Link Distance with OM3 fiber	D	0		100	m
Control* Input Voltage High	Vih	2		VCC+0.3	V
Control* Input Voltage Low	Vil	-0.3		0.8	V
I2C Serial Interface frequence	fs			400k	Hz
Power Supply Noise				50	mVpp
Receiver Differential Data Output Load				100	mVpp

 

Certificates:

Any question about this Active Optical Cable, please leave me an inquiry or contact me directly.