Optical Fiber RoHS Compliant 25GB/S SFP28 LAN-Wdm 40km Optical Transceiver
Product Features Commercial :0 to 70 . C Industrial :-40 to 85 . C Applications Absolute Maximum Ratings Note: Stress in
Send your inquiryDESCRIPTION
Basic Info
Model NO. | GFC-OLLDxx2XL-C(I)D40 |
Delivery Time | 3-7 Days |
Warranty | 3 Years |
Distance | 40km |
Transport Package | Antistatic Bag |
Specification | 25G |
Trademark | GFC |
Origin | Zhejiang China |
HS Code | 8517706000 |
Production Capacity | 50K/Month |
Product Description
Product Features
- Supports 24.33Gb/s to 25.78Gb/s bit rates
- compliant to IEEE 802.3CC
- compliant to SFF-8402 for SFP28 solution
- Digital Diagnostic Monitor Interface with SFF-8472
- Hot pluggable SFP+ footprint
- EML laser and APD Receiver
- Applicable for 40Km SMF connection
- High transmission margin
- Low power consumption<1.8W
- Single 3.3V power supply
- Operating case temperature:
Industrial :-40 to 85 . C
Applications
- 25.78 Gb/s single lane
- CPRI 10
- Other optical links
Absolute Maximum Ratings
Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 4.0 | V | |
Storage Temperature | TS | -40 | 85 | °C | |
Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate | 25.78 | Gb/s | ||||
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Supply Current | Icc5 | 550 | mA | |||
Operating Case Temp. | Tc | 0 | 70 | °C |
Electrical Characteristics (TOP(C) = 0 to 70 ºC,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note | |
Transmitter | |||||||
Differential data input swing | VINPP | 300 | 800 | mVpp | 1 | ||
Tx Disable input | H | TDH | 2.0 | Vcc+0.3 | V | ||
L | TDL | 0 | 0.8 | ||||
Tx Fault output | H | TFH | 2.0 | Vcc+0.3 | V | 2 | |
L | TFL | -0.3 | 0.8 | ||||
Input differential impedance | Rin | 100 | Ω | ||||
Receiver | |||||||
Differential data output swing | Vout,pp | 500 | 900 | mVpp | 3 | ||
Rx Los Output | H | VOH | 2.0 | Vcc+0.3 | V | 4 | |
L | VOL | -0.3 | 0.8 |
- Connected directly to TX data input pins. AC coupled thereafter.
- Or open circuit.
- Into 100 ohms differential termination.
- Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected..
Optical Characteristics (TOP(C) = 0 to 70 ºC, TOP(I) =-40 to 85 ºC,VCC = 3.13 to 3.47 V)
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | 1285.65 | 1286.66 | 1287.69 | nm | |
1290.09 | 1290.10 | 1292,13 | ||||
1294.53 | 1295.56 | 1296.59 | ||||
1299.02 | 1300.05 | 1301.09 | ||||
1303.54 | 1304.58 | 1305.63 | ||||
1308.09 | 1309.14 | 1310.19 | ||||
Ave. output power (Enabled) | PAVE | -1.6 | 6 | dBm | 1 | |
Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
Extinction Ratio | ER | 4.5 | dB | |||
RMS spectral width(-20dB) | Δλ | 1 | nm | |||
Power off Tx disable | TDP | -30 | dB | |||
Transmitter reflection | RIN | -12 | dBm | |||
RIN(OMA) | -130 | dB/Hz | ||||
Receiver | ||||||
Operating Wavelength | 1260 | 1355 | nm | |||
Receiver Sensitivity | PSen | -19 | dBm | 2 | ||
Overload | Pimax | -5 | dBm | |||
Receiver reflection | -26 | dBm | ||||
LOS Assert | Pa | -30 | dBm | |||
LOS De-assert | Pd | -14 | dBm | |||
LOS Hysteresis | Pd-Pa | 1 | 5 | dB |
Notes:
1. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations
2 Measured with a PRBS 231-1 test pattern, @25.78Gb/s, [email protected]*10-5 ..
Typical Interface Circuit
Package Dimensions
Related Products
-
3rd Party SFP-1.25g-Sx Fiber Optic Transceiver Compatible with Cisco Switches
-
High Performance Cisco System Compatible 10g 40km Single Fiber Optic Transceiver XFP
-
China 2/4/6/8/12/16/24 Core MPO/MTP LC/Sc/St/FC/Mu Connector FTTH Indoor Outdoor Armoured Drop LSZH PVC Fiber Optic Optical Patch Cord Pigtail Jumper Cable
-
Quality Underground Fiber Optic Cable Fault Locator